The traditional candle and bag luminary adapted to work with standard Christmas lights. Great for non-holiday events.

Home > By Lighting Type > C7 & C9 Bulbs >

Rectangle Luminary Box for C7 / C9 / Mini Light Bulbs

Shown Assembled
Assembly Required

Additional Photos:

Our Price: $9.99
Pre-season Price: $8.99
You Save: $1.00

Availability/Ships: 24 To 48 Hours
Product Code: 146

Qty:

The following items are included with this product bundle:

5 of Zip Tie - 4" Black (Single) ($0.50 value!)
4 of Zip Tie - 4" White (Single) ($0.40 value!)

[Product Description Page]

The luminary has a long history based mainly on candle illumination but HolidayCoro has updated the concept by allowing you to use C7, C9 and mini lights (LED or incandescent) bulbs in a sturdy waterproof coro luminary. The HolidayCoro luminary has the following features:

Black coro base that stands 2 inches off the ground. There are holes on all four corners for mounting stakes (we recommend old coat hanger wires), three water drain holes and two holes for C7 bulbs, two holes for C9 bulbs and 100 Mini Lights. Along the short edges are half circles to allow the SPT cord to pass under the edge and on the base are SPT strain relief cords. On each of the base corners, holes are pre-punched for zip ties that allow the base to be assembled into a box.
White coro top that is 8 inches wide by 10.6 inches tall and 6 inches deep. There are two flaps, like a card board box that cover the top to keep in more light and reduce snow accumulation. The top assembles into a rectangular box without a bottom. On the base there are four tabs that slide into slots on the luminary base. This allows you to easily assemble and disassemble the top, which lays flat, for easy off-season storage.

This item includes the following items:

One black coro base with pre-punched holes
One white coro top with pre-punched holes
Six black 4" zip ties
Five white 4" zip ties

Requires customer supplied C7, C9 stringer, bulbs and/or mini lights and controller. Assembly required.

Hands on video

Product Features
The HolidayCoro luminary has the following features:

Black Coro Base
- 10.5 inches wide by 8.5 inches deep and 2 inches high.
- The 2 inch tall base allows for the base of the bulbs to be hidden and protected. This also allows for the top to be positioned above snow or grass.
- 100 mounting holes for incandescent or LED mini lights
- 3 mounting holes for incandescent of LED C7 bulbs
- 3 mounting holes for incandescent of LED C9 bulbs
- Four mounting holes for securing the lantern to the ground (we recommend old coat hanger wires cut in half.)
- Half circles along the short edges to allow the power cord to pass under the edges
White / Translucent Coro Top
- 8 inches wide by 10.6 inches tall and 6 inches deep (top only.)
- Two top flaps, like a card board box, that cover the top to keep in more light and reduce snow accumulation.
- Top assembles into the base with four slots on the luminary base - allowing easy assembly and disassembly of the top, which lays flat, for easy off-season storage.
Assembly of the coro takes about 2-4 minutes.
No painting required.

This package also includes the following items:

Four black 4" zip ties (for base assembly)
Five white 4" zip ties (for top assembly)

Requires the following items for complete assembly:

One or more of the following types of lights:
- 100 or less (70 count strings are fine) mini-lights
- Three C9 bulbs
- Three C7 bulbs
Knife/dikes for cutting zip ties

Average Rating:

5 of 5

| Total Reviews: 1 Write a review »

0 of 0 people found the following review helpful:

Luminary boxes	November 11, 2012
Reviewer: Randall Hill from Houston, TX United States

Easy to build. Gives you the look of the white lunch sacks and candles. Set the LOR controller to shimmer for that candle flickering look. Have the RGB set up changing colors. Different ways to setup for what you're looking for.

Was this review helpful to you?