Home > DIY Products > Waterproof Enclosures / Mounting Adapters & Kits (CG-1500 Style) >

Flex Expansion Board System Long Range Receivers to CableGuard CG-1500 Mounting Plate Adapter (Base Mount)
Flex Expansion Board System Long Range Receivers  to CableGuard CG-1500 Mounting Plate Adapter (Base Mount)
Photos May Shown Optional Items
Assembly required


 
Additional Photos:


Our Price: $9.99


Availability/Ships: Same Day / Delivery Times
Product Code: 642-KIT1


The following items are included with this product:

CG-1500 Mounting Enclosure

Waterproof Enclosure (CG-1500) [Add $18.99]
EasyPlug3 Female Pigtails

4 of Female EasyPlug3 Pigtail Cables [Add $6.99]
    - Required to hook directly to HolidayCoro EasyPlug3 Pixels
EasyPlug3 Male Pigtails (DIY Applications)

No Male Pigtail - I Am Using HolidayCoro RGB Pixel Lights With EasyPlug 3 Plugs
4 of Male EasyPlug3 Pigtail Cables [Add $4.99]
8 of Male EasyPlug3 Pigtail Cables [Add $9.99]
AlphaPix Long Range Receiver

No Long Range Receiver - I've purchased separately
1 of AlphaPix Flex 4 Cable Output / Long Range Receiver Board [Add $16.95]
2 of AlphaPix Flex 4 Cable Output / Long Range Receiver Board [Add $33.90]
CAT5 Network Data Signal Cable

No Data Cable - I'll Provide My Own
14 Foot / 4 Meter Green CAT5 Data Cable for Data Signal [Add $3.49]
25 Foot / 7.6 Meter Green CAT5 Data Cable for Data Signal [Add $3.99]  - Save $.50
50 Foot / 15 Meter Green CAT5 Data Cable for Data Signal [Add $5.79]  - Save $.70
100 Foot / 30 Meter Green CAT5 Data Cable for Data Signal [Add $8.99]  - Save $2.00
Click Here For Complete CAT5 List and Accessories
3/4" I.D. Cable Passage and Cable Strain Relief

None - I have my own solution for cable reinforcement
1 of 3/4" Cord Grip Clamp for CG-1500 Enclosure (No Pre-Drilled Holes, I'll Drill them myself) [Add $1.49]
2 of 3/4" Cord Grip Clamps for CG-1500 Enclosure (No Pre-Drilled Holes, I'll Drill them myself) [Add $2.98]
PRE-DRILLED: 1 of 3/4" Cord Grip Clamp (One Pre-Drilled Hole on Left Side) [Add $1.98]
   - Requires purchase of CG-1500 Enclosure for Holes to be Drilled Into
PRE-DRILLED: 1 of 3/4" Cord Grip Clamp (One Pre-Drilled Hole on Right Side) [Add $1.98]
   - Requires purchase of CG-1500 Enclosure for Holes to be Drilled Into
PRE-DRILLED: 2 of 3/4" Cord Grip Clamps (Two Pre-Drill Holes, both Left & Right Sides) [Add $3.97]
   - Requires purchase of CG-1500 Enclosure for Holes to be Drilled Into
To Provide Input Power to Power Supply

None - I'll be supplying my own power cord
1 of 120v AC Input Cord 5Ft - USA, CA, MX [Add $2.99]
1 of 240v AC Input Cord 5Ft - Australia, NZ, AR [Add $3.99]
350w Power Supply

None - I'll be supplying my own power supply
1 of 12v - 350w Power Supply [Add $23.95]
1 of 5v - 350w Power Supply [Add $23.95]
14 AWG Hook-up Wire (Power Supply to Controller)

2 Feet of Heavy Duty 14 AWG Power Wire [Add $1.99]
Pigtail Cable Labels

Outputs 1 to 4 / 5 Volt / Smart Pixel / Yellow Shrink Wrap [Add $0.98]
Outputs 1 to 4 / 12 Volt / Smart Pixel / White Shrink Wrap [Add $0.98]
Outputs 1 to 4 / 12 Volt / Smart Pixel / White Shrink Wrap (QTY 2) [Add $1.96]
Outputs 1 to 4 / 5 Volt / Smart Pixel / Yellow Shrink Wrap (QTY 2) [Add $1.96]
No Pigtail Labels

Qty:  
[Product Description Page]
 
.
Product Features
This product also available Ready2Run with AlphaPix Long Range Receivers installed

This adapter is designed to mount the following combinations of hardware into a CG-1500 enclosure:

  • Combination 1 - AlphaPix Flex Long Range Receiver
  • Combination 2 - Falcon V3 Differential Receiver
    • One or two Falcon V3 Differential Receiver
    • One 350w power supply
    • NOTE: HolidayCoro does not sell or support Falcon products
  • Combination 3 - PixLite Long Range Isolated Differential Receiver
    • One or two Advatek Long Range Regular / Isolated Differential Receiver
    • One 350w power supply
    • NOTE: HolidayCoro does not sell or support Advatek products
This kit includes all mounting screws and adapter plate. This kit does not include the power supply, wiring. receivers or enclosure - all are optional, see this product page for all optional items.

Installation Notes:
  • Hole Type Indicator Marks
    • X = Threaded point screws for adapter plate to CG-1500 Enclosure mounting (6 Screws)
    • \ = 350w Power Supply Mounting Holes (4 Steel Phillips Screws)
    • - = Bottom screws for both AlphaPix and Falcon Receivers (4 Threaded screws / 12 Nylon washers / 8 Nuts)
    • | = Top screw for AlphaPix Receiver (2 Threaded screws / 6 Nylon washers / 4 Nuts)
    • / = Top screw for Falcon Receiver (2 Threaded screws / 6 Nylon washers / 4 Nuts)
    • Square Box = Both top and bottom screws for Advatek Receivers (6 Threaded screws / 18 Nylon washers / 12 Nuts)
    • ^ = Zip tie hold down for power input wiring (2 locations)

Share your knowledge of this product. Be the first to write a review »