Home > DIY Products > Waterproof Enclosures / Mounting Adapters & Kits (CG-1500 Style) >

Falcon 16 V2 & V3 + 350w Power Supply to CableGuard CG-1500 Mounting Plate Adapter Kit (Base Mount)
Falcon 16 V2 & V3 + 350w Power Supply to CableGuard CG-1500 Mounting Plate Adapter Kit (Base Mount)
Power Supply and Enclosure Sold Separately
Falcon controller not sold by HolidayCoro


 
Additional Photos:


Our Price: $11.99


Availability/Ships: Same Day / Delivery Times
Product Code: 652-KIT1


The following items are included with this product:

CG-1500 Mounting Enclosure

Waterproof Enclosure (CG-1500) [Add $18.99]
EasyPlug3 Female Pigtails

16 of Female EasyPlug3 Pigtail Cables [Add $19.99]
    - Required to hook directly to HolidayCoro EasyPug3 Pixel
    - Save $8.65 when purchased with controller or mounting kits
    - Discounted price only available at time of controller purchase
EasyPlug3 Male Pigtails (DIY Applications)


1" I.D. Cable Passage and Cable Strain Relief

None - I have my own solution for cable reinforcement
2 of 1" Cord Grip Clamps for CG-1500 Enclosure (No Pre-Drilled Holes, I'll Drill them myself) [Add $2.98]
2 of 1" Cord Grip Clamps for CG-1500 enclosure (Two Pre-Drill Holes, both Left and Right Sides) [Add $3.97]
   - Requires purchase of CG-1500 Enclosure for Holes to be Drilled Into
To Provide Input Power to Power Supply

None - I'll be supplying my own power cord
1 of 120v AC Input Cord 5Ft - USA, CA, MX [Add $2.99]
1 of 240v AC Input Cord 5Ft - Australia, NZ, AR [Add $3.99]
350w Power Supply

None - I'll be supplying my own power supply
1 of 12v - 350w Power Supply [Add $23.95]
1 of 5v - 350w Power Supply [Add $23.95]
14 AWG Hook-up Wire (Power Supply to Controller)

2 Feet of Heavy Duty 14 AWG Power Wire [Add $1.99]
Pigtail Cable Labels

Outputs 1 to 16 / 5 Volt / Smart Pixel / Yellow Shrink Wrap [Add $2.48]
Outputs 1 to 16 / 12 Volt / Smart Pixel / White Shrink Wrap [Add $2.48]
No Pigtail Labels

Qty:  
[Product Description Page]
 
.
General Feature Overview
Also works with V3 controller
How to mount optional cable clamps in common enclosures
Product Features
This adapter is designed to mount the following combinations of hardware into a CG-1500 enclosure:

  • Includes 6 screw down points to the CG-1500 base
  • Combination 1 (typical)
    • One Falcon F16V2-R or F16V3 on base
    • One 350 Watt Power Supply (5v or 12v) on base
    • F2 & F3 Notes:
      • NOTE: Due to all wall mount screw points (there are 3 on the CG-1500) being covered by the controller and power supply, to use the top holes, it requires temporarily removing the adapter plate to CG-1500 screws
      • NOTE: Due to the tall nature of this controller, we recommend trimming the vertical fins at the base of the controller to ensure sufficient space.
      • NOTE: Power input #1 can be fed via power wire coming from around the top of the power supply, around to the left of the controller instead of to the right and down along the base of the controller.
    • F2 Notes:
      • Falcon V2 NOTE: It is not possible to use RS485 DMX output 4 when also mounting a 350w power supply. If using the three remaining RS485 outputs, you can shift the board over to the left to make more space for the CAT5 cables if needed.
  • Combination 2
    • One Falcon F16V2-R or F16V3 on base (bottom)
    • One Falcon Expansion Board on base (top)
    • OPTIONAL: While it is possible to mount a power supply on the door using #640-KIT1 and still have the door close, this solution likely requires more power that could be provided by a 32 output controller and we'd recommend using our #639-KIT1 dual power supply adapter plate and separate enclosure to provide power.
  • Combination 3 (not recommended)
    • Two 350 Watt Power Supplies mounted horizontally (only includes four power supply mounting screws, enough for one power supply)
    • NOTE: We recommend using our #639-KIT1 as it is less expensive and also places the power supplies facing downward where it is easier to make wiring connections to the bottom of the enclosure. This 639-KIT1 kit also includes 8 power supply screws for both power supplies.
  • Combination 4
    • One Falcon F16V2-R or F16V3 on base (bottom)
    • One Raspberry Pi B+ on base (top)
  • Combination 5
    • One 350 Watt Power Supply (5v or 12v) on base (top or bottom)
    • One Raspberry Pi B+ on base (top or bottom)
This kit includes all mounting screws and adapter plate. This kit does not include the power supply, wiring or enclosure - all are optional.

Installation Notes:
  • Hole Type Indicator Marks
    • X = Threaded point screws for adapter plate to CG-1500 Enclosure mounting (6 Screws)
    • \ = 350w Power Supply Mounting Holes (4 Nylon Screws)
    • / = F16V2-R or F16V3 Controller in normal location at base of unit below 350w PSU (4 Threaded screws / 12 Nylon washers / 2 Nuts)
    • - = F16V2-R or F16V3 + F16 Expansion Mounting (4 Threaded screws / 12 Nylon washers / 4 Nuts)
    • Triangle = F16V2-R Controller in shifted left location at base of unit below 350w PSU (4 Threaded screws / 12 Nylon washers / 2 Nuts)
    • Large Square = F16V3 Controller (4 Threaded screws / 12 Nylon washers / 2 Nuts)
    • * = Rasberry Pi (4 Threaded screws / 12 Nylon washers / 2 Nuts)
    • + = F16 Expansion Board (4 Threaded screws / 12 Nylon washers / 2 Nuts)
  • Due to the inherent height of this controller, when mounting the controller and a power supply on the base, the power inputs will be very close to the bottom of the enclosure
  • It is not possible to run the cables out the pre-cut holes in the base of the CG-1500 when mounting the controller and a 350w power supply. Please use mounting clamps sold on this page.
  • When powering both banks and when used with a 350w power supply, bank 1 requires 16 inches of power wire and 8 inches of power wire for bank 2, a total of 24 inches of wire.
HolidayCoro does not sell the Falcon controller.

You might also be interested in...
One 350w "Meanwell" Style Power Supply to CableGuard CG-1500 Mounting Kit (Door Mount)
Our Price: $9.19

Add
One 350w "Meanwell" Style Power Supply to CableGuard CG-1500 Mounting Kit (Door Mount)

Average Rating: 4.5 of 5 Total Reviews: 14 Write a review »

  0 of 0 people found the following review helpful:
 
Awesome kit - well thought out December 9, 2018
Reviewer: Paul Arceneaux from Orange, TX United States  
I tried several different enclosures before ordering from HolidayCoro. Wow, should have went with them first! So well thought out and had EVERYTHING I needed. The mounting board was perfect, screws, power cables, etc were all just what was needed. Made my life so much easier and less complicated trying to figure out how I was going to put my PSU and controller together. I have the Falcon F4, so I did have to modify the mounting plate to fit, but that was easy enough.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Kit Works October 30, 2018
Reviewer: John Futch from Hanahan, SC United States  
I've purchased a lot of stuff from HolidayCoro in the past 2 years. ALWAYS on time. ALWAYS packaged extremely well. ALWAYS what I order. This mounting plate works as it's supposed to and was installed easily and in little time.
Good stuff!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
October 11, 2018
Reviewer: JP from LEGENDARY LAKE MILLS, WI United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Fast shipping, excellent products! August 13, 2018
Reviewer: Kevin Howard from Fort Worth, TX United States  
Simply adding another controller, can't go wrong with this product.  I like that they have laid out where everything goes on the adapter.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Fantastic combo July 25, 2018
Reviewer: DAVID LIVELY from Pembroke, VA United States  
Buying a CG-1500 without a plate is akin to buying a fishing boat with no trolling motor.  Sure, it works...but not as well as it should!  The CG1500 is what it is... solid well known standard box.  Set up properly for our use.  Getting the base mount lets you actually use it!  Pilot holes were all dead  on, plenty of mounting hardware for PCB's etc.  I modified this one as well, using the F16V2/3 mounting as intended then added other items.  Works like a charm!  1000x easier than building your own!

Was this review helpful to you?

View All Customer Reviews