Home > Ready2Run Controllers > EasyLights Controllers (3rd Generation) >

16 Output EasyLights E1.31 / Artnet Controller + 350 to 700 Watts of Power + Large Enclosure + 16 EasyPlug3 Pigtails / Ready2Run Assembled
16 Output EasyLights E1.31 / Artnet Controller + 350 to 700 Watts of Power + Large Enclosure + 16 EasyPlug3 Pigtails /  Ready2Run Assembled
Photos show only controller


 
Additional Photos:


Price Excluding Power Supplies: $369.95
Sale Price: $199.95
You Save: $170.00


Availability / Ships: Usually Ships in 24 Hours
Product Code: 860


The following items are included with this product:

To Cap Unused Female Plugs


For Local Sequence Storage and Playback

32GB of On-Controller Sequence Memory (Up to 640 Sequences) [Add $12.99]
- NOTE: Due to timing issues with some SD storage cards, not all third-party SD cards are supported. Controller will test and notify customer of an incompatible card.
Pre-Configured Input Voltage & Plug Type

110 to 120 Input Voltage and Input (United States, Canada, Mexico, others) - Type B Plug
220 to 240 Input Voltage and Input (Australia, NZ, China, Others) - Type I Plug
220 to 240 Input Voltage and Input (All Other Countries) - Type B Plug
    Click here for voltage and plug details
Power Supply - Bank 1 of 2

1 of 12 Volt / 350 Watt DC Power Supply [Add $23.95]
1 of 12 Volt / 350 Watt DC Power Supply (Meanwell Brand) [Add $29.49]
1 of 5 Volt / 350 Watt DC Power Supply [Add $23.95]
Power Supply - Bank 2 of 2

No Power Supply on Bank 2 / Single Power Supply (see above)
1 of 12 Volt / 350 Watt DC Power Supply [Add $23.95]
1 of 12 Volt / 350 Watt DC Power Supply (Meanwell Brand) [Add $29.49]
1 of 5 Volt / 350 Watt DC Power Supply [Add $23.95]
Setup and Troubleshooting Assistance

Regular Support (via E-Mail) - Included with controller purchase [No Additional Cost]
    Priority Support with Phone and Remote Control Support also Available
    Click Here for support time frames and options (opens in new tab)

Controller Warranty Period

Pixel Controller - No Warranty / No Return [No Additional Cost]
EasyLights 16 Controller - 1 Year Hardware Warranty [Add $24.99]
EasyLights 16 Controller - 3 Year Hardware Warranty [Add $39.99] 
Click here for detailed information about our warranty policy (opens in new tab)
Click here for information on why we offer warranty options (opens in new tab)
  - Warranty period cannot be adjusted after purchase
  - Ready2Run Packages: Warranty applies only to controller, standard warranty applies to all other items in package
 - Controller hardware is identical for all warranty levels
Clamps for Mounting CG-1500 & HC-2500 To Pole

No Clamp - I'll be using screws or other methods to mount enclosure
    Click here for video of installation (opens in separate tab)
2 Clamps - Round poles Up to 2 Inches in Diameter (Top and Bottom) [Add $2.98]
4 Clamps - Round poles Up to 4.5 Inches in Diameter (Top and Bottom) [Add $5.96]
To Transmit FM Audio Broadcast

FM Audio Broadcast Transmitter + Audio Line Level Output Board [Add $89.98]
  - For use with EasyLights and HinksPix Pro CPU / Controllers Only
  - For stand-alone sequence playback using EasyLights.com Sequences or uploaded sequences played from controller. Only one per display required.
  - (Certified for use in USA, Not legal in Canada, Other countries should check local restrictions)
CAT5 Ethernet and Long Range Data Signal Cable

No Data Cable - I'll Provide My Own
5 Foot / 1.5 Meter Green CAT5 Data Cable for Data Signal [Add $1.99]
7 Foot / 2.1 Meter Green CAT5 Data Cable for Data Signal [Add $2.99]
25 Foot / 7.6 Meter Green CAT5 Data Cable for Data Signal [Add $3.99]  - Save $.50
50 Foot / 15 Meter Green CAT5 Data Cable for Data Signal [Add $5.79]  - Save $.70
100 Foot / 30 Meter Green CAT5 Data Cable for Data Signal [Add $8.99]  - Save $2.00
200 Foot / 60 Meter Green CAT5 Data Cable for Data Signal [Add $17.99]  - Save $2.00
Click Here For Complete CAT5 List and Accessories

Qty:  
[Product Description Page]
 
.
Product Features
This pre-assembled package includes everything but the lights using our sixteen output AlphaPix 16 controller. This package is useful for customers that want to use our EasyPlug3 lights and EasyPlug3 extension cables for a 100% solder free and plug and play solution. This fully assembled kit features:

  • A Highly Advanced 16 - E1.31 & Artnet Pixel controller able to handle the following:
    • 16 dedicated SPI pixel outputs
    • 3 dedicated RS485 outputs for legacy devices
    • 5,540 total pixels total / 340 per output + 1,536 channels on dedicated RS485 outputs
    • LCD Interface
    • Up to 5 amps of power per output (60w @ 12v / 25w @ 5v per output)
    • Play on controller functionality (SD card playback)
    • Setup instructions here: www.HolidayCoro.com/HinksPix
  • Large weather proof mounting enclosure and mounting plate
  • Power
    • 5v or 12v output (see options above)
    • One or two power supplies (see options above)
    • Input voltages from 90 to 240 volts AC (see options above)
      • US or Australia power input plugs (see options above)
  • Sixteen, 23 inch, pre-attached EasyPlug3 pigtails which work with all HolidayCoro EasyPlug3 extension cables and pixels
    • Each pigtail output is marked with a color coded label indicating voltage and output number
  • Fully wired, tested and ready for you to attach your EasyPlug3 pixel lights or your own pixel strings using our EasyPlug3 Male Pigtails (soldering required - see optional male pigtails above)
  • Fully compatible with LOR S3/S4/S5, xLights, LightShow Pro, Vixen, Nutcracker, HLS, Madrix and hundreds of other E1.31 and ArtNet sequencing and control applications.

You might also be interested in...
Smart / Pixel RGB LED Node 8mm/12mm / 12v / 2811 / 50 Node String / 3" Spacing / Black / Waterproof EasyPlug3 Input and Output Cables Smart / Pixel RGB LED Strip 30 LEDs/m 10 Pixels/m / Pre-Attached 6in EasyPlug3 Input and Output Cables / Waterproof Tube (16ft-6in/5 meter Roll) - 12v / 2811 / RGB Color Output Order
Our Price: $23.49

Add
Our Price: $21.99

Add
Smart / Pixel RGB LED Node 8mm/12mm / 12v / 2811 / 50 Node String / 3" Spacing / Black / Waterproof EasyPlug3 Input and Output Cables Smart / Pixel RGB LED Strip 30 LEDs/m 10 Pixels/m / Pre-Attached 6in EasyPlug3 Input and Output Cables / Waterproof Tube (16ft-6in/5 meter Roll) - 12v / 2811 / RGB Color Output Order

Average Rating: Average Rating: 4 of 5 4 of 5 Total Reviews: 2 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 live updates and great integration February 16, 2020
Reviewer: Bruce Hilty from League City, TX United States  
Well I was looking for my first controller box and boy did I find a winner.  I was able to choose voltage for each of the two 8 port outputs (I took 5v and 12v) with the WiFi for time and firmware and the SD card for standalone and yes  integrated FM transmitter support, I am not sure I could have done better for a clearance box.  this bad boy uses the same firmware as its older brother Hinks Pro and xlights drives it beautifully.  But all that is just 4 star stuff.  why 5?  support.  I reached by phone and got unbelievable HC support.  If they have what I need I am getting it there.  1 day shipping to me aint bad either.

Was this review helpful to you?

  3 of 4 people found the following review helpful:
 
3 of 5 Decent controller September 20, 2019
Reviewer: Anonymous Person  
I would give this controller a 5 star if it came with a manual or one you could download. I have tried contacting Easylights.com but 2 weeks and no one has gotten back with me. From this experience I wouldn't recommend it to anyone.

Was this review helpful to you?