Home > EasyLights > EasyLights - Controllers Only >

24 Output / 120 Volt Controller for Standard 120v LED and Incandescent Lights / Assembled / Ready2Run / (USA, Canada, Mexico Only) / E1.31 Artnet Input / EasyLights CPU
24 Output / 120 Volt Controller for Standard 120v LED and Incandescent Lights / Assembled / Ready2Run / (USA, Canada, Mexico Only) / E1.31 Artnet Input / EasyLights CPU
Photos show only controller


 
Additional Photos:


Our Price: $299.95


Availability/Ships: Usually Ships in 24 Hours
Product Code: 941


The following items are included with this product:

For Local Sequence Storage and Playback

32GB of On-Controller Sequence Memory (Up to 640 Sequences) [Add $12.99]
- NOTE: Due to timing issues with some SD storage cards, not all third-party SD cards are supported. Controller will test and notify customer of an incompatible card.
CAT5 Network Data Signal Cable

No Data Cable - I'll Provide My Own
14 Foot / 4 Meter Green CAT5 Data Cable for Data Signal [Add $3.49]
25 Foot / 7.6 Meter Green CAT5 Data Cable for Data Signal [Add $3.99]  - Save $.50
50 Foot / 15 Meter Green CAT5 Data Cable for Data Signal [Add $5.79]  - Save $.70
100 Foot / 30 Meter Green CAT5 Data Cable for Data Signal [Add $8.99]  - Save $2.00
Click Here For Complete CAT5 List and Accessories
To Transmit FM Audio Broadcast

FM Audio Broadcast Transmitter + Audio Line Level Output Board [Add $89.98]
  - For stand-alone sequence playback using EasyLights.com Sequences. Only one per display required
Clamps for Mounting CG-1500 & HC-2500 To Pole

No Clamp - I'll be using screws or other methods to mount enclosure
    Click here for video of installation (opens in separate tab)
2 Clamps - Round poles Up to 2 Inches in Diameter (Top and Bottom) [Add $2.98]
4 Clamps - Round poles Up to 4.5 Inches in Diameter (Top and Bottom) [Add $5.96]

Qty:  
[Product Description Page]
 

Hands On Demo
How to enable Wireless Mode on EasyLights
How to connect your EasyLights to your Home WiFi network
Product Features
This 24 output AC based controller is perfect for controlling legacy lights such as C7's, C9's, mini-lights and other 120v AC based lights. This fully assembled controller features:

  • Fully assembled, tested and Ready2Run
  • Advanced EasyLights controller system with:
    • Cloud based control and management
    • Additional details coming soon
  • 1 dedicated RS485 output for legacy devices
  • 24 dedicated AC outputs
    • 2 Banks, specifications PER bank:
      • Input
        • 1 dedicated US type B grounded power input cable with 15 amp fuse per bank
        • Up to 15 amps of power per bank
      • Output
        • 12 outputs per bank
        • 8 amps per output
        • Dedicated US type B grounded output pigtail cable per output
  • Large weather proof mounting enclosure and mounting plate with cable clamp strain reliefs
  • Two dedicated, waterproof CAT5 input jacks (wireless alternative)
  • Fully compatible with LOR S3/S4/S5, xLights, LightShow Pro, Vixen, Nutcracker, HLS, Madrix and hundreds of other E1.31 sequencing and control applications.

Average Rating: 4 of 5 Total Reviews: 4 Write a review »

  0 of 0 people found the following review helpful:
 
24 channel controller April 12, 2019
Reviewer: Scott Storey from Syracuse, UT United States  
Looks great, but has no paper work or anything to tell you how to set it up, so it's just sitting in a box ,not to happy about it right at the moment.
---- HolidayCoro Reponse ----
I'm sorry there has been confusion with setup of this product along with the another controller.  I am showing that we reached out (ticket 2217) with several phone calls and a number of emails offering assistance but we have been unable to reach you.  We absolutely want to assist you with setup of your controllers but we need to have a response in order to have a support engineer assist with the setup.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
Great product December 27, 2018
Reviewer: Scott from McKinney, TX United States  
Love the EasyLights 24 port controller.  Only complaint is there is virtually no documentation on how to configure and set up.  Fortunately, the Holidaycoro team is very knowledgeable and responded quickly to emails asking questions.  Hopefully some videos will be out soon to help with configuration

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great controller but needs documentation November 20, 2018
Reviewer: Steve Roake from Mokena, IL United States  
This controller is great after figuring it out.
I am using it as an E1.31 controller driven by LOR suite. Not using easylights.
A sheet of paper explaining that it has its own web server would have saved a lot of time trying to navigate the on board menu screens.
Other than that, it is a much bigger bang for your buck than LOR AC controllers.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Anotherly seemingly awesome product from the HC! October 25, 2018
Reviewer: Kevin H from Keller, TX United States  
I purchased this in order to replace my other AC controllers and be able to expand that part of my show.  At first, the E.131 set up was a bit hard to do until David helped me over the phone, providing the world-class customer service the HC is known for.  Once done and IPs assigned to all units. I hooked 4 units up together and plugged into the computer, has access to all 4 in no time.  I have not actually plugged lights in yet but so far, so good.

Was this review helpful to you?