Home > DIY RGB Packages > RGB Starter Packages >

DIY Light-o-Rama(tm) Cosmic Color Ribbon (CCR) Clone Package
DIY Light-o-Rama(tm) Cosmic Color Ribbon (CCR) Clone Package
See description for included items

Compare with the LOR CCR at: $249.95
Our Price: $93.99
You Save: $155.96

Availability/Ships: Same Day / Delivery Times
Product Code: 811

The following items are included with this product:

DMX Data Generation Source To Be Used

I Already Have an Actidongle or Other RS384 Based, E1.11 / DMX 1990 Data Source
1 of ActiDongle - DMX Dongle (Enttec Pro Compatible) [Add $47.95]  Save $2 when purchased with the sample kit! (limit 1)
Using AlphaPix or EasyLights RS485 Interface  << Click this link for setup information using AlphaPix / EasyLights controllers
NOTE: This dumb controller will not connect directly to the Ethernet (CAT5) jack on a PC or network switch
When using with LOR S3/S4/S5, requires Actidongle (see above) and LOR Advanced edition Software

[Product Description Page]
Thinking of using a Color Cosmic Ribbon in your display? Our DIY CCR package can save you 63% off the Light-o-Rama price!
William's CCR Clone Kit Window Outlines
Product Features
This package includes everything you need to replicate the same functionality contained in the LOR CCR product, including:

  • The same length of strip as the CCR at 16.5 feet (5 meters) with 50 pixels and a total of 150 RGB LEDs. The strip included in this kit is able to produce 16 million colors compared to the LOR CCR which is limited to 32,768 colors allowing you to have smoother fades.
  • RS-485 based DMX Pixel controller with built-in, back-lit LCD display for setting all options without the need for PC configuration. This controller is controlled using the industry standard and open protocol - DMX and does not use the LOR protocol.
  • With the included 5 Foot Extension so you'll be able to locate your pixel controller further from the final pixel strip mounting location.
  • 45w waterproof power supply supplies just the right amount of power for this strip and controller combination.
  • Optional ActiDongle produces DMX output (the LOR CCR also requires a "dongle" - sold separately) from all major sequencing applications including LOR S3 Advanced.
  • This controller is compatible with LOR S3 Advanced (and all other sequencing applications when used with a DMX dongle) but cannot be directly connected to LOR controllers (daisy chained.)
  • Minor assembly required. Controller (as also with the LOR CCR) requires waterproof mounting location.

If you expect to purchase 3 or more of the CCR Clone Pixel Kit, we recommend contacting us for other possible solutions that may be less expensive.

Building a "CCR Tree" - see our pre-assembled CCR Tree selection in the Pixel Tree Section.

You might also be interested in...
ActiDongle (tm) - Active DMX Dongle (Enttec Pro Compatible) - V2
Our Price: $44.99
Excluding Optional Support

Enttec Pro DMX Dongle

Average Rating: 5 of 5 Total Reviews: 2 Write a review »

  0 of 0 people found the following review helpful:
RGB March 11, 2016
Reviewer: Calvin Robinson from Macon, GA United States  
Bought this kit to get into RGB's and I was amazed and I had cars lined up in the street bringing kids to see the Christmas light show...They loved it and now I'm moving up to the Alphapix 16v2...BUY FROM HOLIDAYCORO CAUSE YOU CANT BEAT THE PRICE AND Quality SERVICE..

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Building arches January 17, 2015
Reviewer: Brad from Myrtle Beach  
Bought two of the and built arches with them. They work well with LOR 3 sequence editor and are going to be a great addition to the show.

Was this review helpful to you?