|
180 Degrees
of Coverage
|
Ideal Viewing Distance From Audience
|
15+ Feet
|
Items Suitable for Display
|
Scrolling text, singing faces,
animated graphics
|
Ease of Sequencing
|
12 x 50 "CCR' Sequences
Christmas Sequence Downloads Halloween Sequence Downloads
|
Pixel Counts
|
Total Pixel Nodes per Tree
|
600
|
Vertical Sections / Strings
|
12
|
Pixel Nodes per Section / String
|
50 Nodes
|
Pixel-To-Pixel Spacing
|
2 Inches
|
Tree Dimensions
|
Height (Pixel Area)
|
8.5 Feet
|
Height (Overall Maximum)
|
9.5 Feet
|
Width (Pixel Area)
|
8 Feet
|
Width - Base of Tree (Overall Maximum)
Width of PixNode Strips™ at base
|
9 Feet
|
Width - Top of Tree
|
6.3 Inches
|
Pixel Spacing - Top (Horizontal / Pixel-to-Pixel)
|
1.5 Inches
|
Pixel Spacing - Bottom (Horizontal / Pixel-to-Pixel)
|
10 Inches
|
General
|
Power Injection Required / Cables per Strand
|
No / One Cable
|
Type of pixel used
|
8mm RGB LED with 12mm Body
|
Assembly
|
Controller - Pre-wired with power and cables
|
Optionally Available as Pre-Assembled
|
Lights - Pre-wired with waterproof connections
|
Optionally Available as Pre-Assembled
|
Lights / Nodes pre-installed into PixNode Strips
|
No
Usually 30 to 60 Minutes
|
Overall erection time for entire tree
(with assembled hardware)
|
Usually
60 Minutes
|
DIY Customer assembly time
(excludes erection time)
|
2 Hours (Experienced)
3 to 6 Hours (Novice)
|
Additional Required Items (Sourced by Customer)
|
Center Pole - 1-3/8" Top Rail Tubing
(Home Depot, Lowes, Menards)
|
One, 10 Foot Section
|
8 Inch to 12 Inch Galvanized Nail / Stakes
|
15
|
Tent Stake / Re-Bar or Similar
(Depends on local soil and ground conditions)
|
3 for Low Wind Load Areas
4 for High Wind Load Areas
|
Guy Wires or Rope
|
3 for Low Wind Load Areas
4 for High Wind Load Areas
|
Sequencing Software
|
Works with 100% of all Holiday Sequencing
Software on the market including: Light-o-Rama S3 & S4 xLights /Nut Cracker LightShow Pro Vixen 3
|
Computer / Show PC
|
Requires PC with Ethernet
network port (nearly all have this)
Type and power of PC depends on sequencing software selected by customer.
|