Home > DIY Products > RGB Lights / Bulbs / Strip > Smart / Pixel RGB Lights - Nodes / Bullets >

Smart / Pixel LED RGB 8mm/12mm Square/Lay-Flat Node - 5v / 2811 / 50 Node String / Black / Waterproof Plugs



 
Our Price: $23.49


Availability/Ships: Usually Ships in 24 Hours
Product Code: 672-WP

MegaTree Mounting Strip - Select the Spacing

None - I'll mount them using my own solution
1" Center to Center Node Spacing - 94 Holes Total / 94.7" Long / BLACK / Price per Strip - [Add $2.49]
1" Center to Center Node Spacing - 94 Holes Total / 94.7" Long / CLEAR / Price per Strip - [Add $3.49]
3" Center to Center Node Spacing - 32 Holes Total / 94.8" Long / BLACK / Price per Strip - [Add $2.09]

Qty:  
[Product Description Page] [FAQ & Documentation Page]
 
.
Product Features
  • Features
    • Please note that these require a smart pixel controller - these will not work with dumb controllers!
    • Smart / Pixel Nodes
    • Pixel protocol WS2811 (supported by every major pixel controller)
    • Viewing angle of 120 degrees
    • Waterproof 6" plugs on input and output wire
  • Lights
    • Total LEDs per node: 3 (Red, Green, Blue)
    • Total LED nodes per string: 50
    • Total DMX channels required per string: 150 DMX Channels
  • Dimensions
    • Overall Length from node 1 to node 50: 12 feet, 2 inches
    • Node to node (center) distance: ~3 inches
    • Lead in and lead out wire length: 6 inches (both ends) with male and female waterproof plugs
    • Maximum diameter of node: 12mm / .47"
  • Weather
    • Silicone body/base
    • Epoxy sealed body/casing to ensure waterproof wiring and electronics
    • IP68
  • Wiring colors:
    • Wire: 34 x 0.11mm (18 AWG) - This wire is much more flexible and allows longer runs than the standard 18 core wire in most pixels.
    • Pixel direction is marked with arrows on circuit board (input side)
  • Power
    • 5v DC Input
    • White (all three colors) per node: 60 miliamps / .3 Watts
    • White (all three colors) per string (50 nodes): 3 amps / 15 Watts

You might also be interested in...
EasyPix Controller / DMX to SPI Smart Pixel Decoder V3 Power Supply - 12v / 29 amps / 350 Watts PixLite 16 Controller PixLite 4
Our Price: $39.99 / .23 Cents per Controlled Pixel

Add
Our Price: $23.99

Add
Our Price: $154.99

Add
Our Price: $99.99

Add
Push Button DMX to SPI Smart Pixel Decoder / Controller
18" x 24" RGB 8mm LED/12mm Base Pixel Node Matrix - Mounting Board and Frame Clear Lexan 1/2" Pipe Mounting Clip / Mounts RGB Strips and Modules to Fascia, Soffit, Roofs and Walls (Single Clip) PixNode Strip(tm) - 12mm RGB Node Node Mounting Strips for Pixel MegaTrees PixNode Net™ Flexible - Pixel Node Mounting Net
2 or More Pixel Panels - Only: $49.99

Add
5 to 49 Count Price: $0.69

Add
Price: $2.09 to $3.49 Per Strip

Add
Price: $64.95 to $79.95

Add

Share your knowledge of this product. Be the first to write a review »