Power Supply - Waterproof 12v / 3.75 amps / 45 Watts

Home > RGB Hardware Accessories > Power Supplies >

Power Supply - Waterproof 12v / 3.75 amps / 45 Watts / No Plug

Product may differ slightly from photo.
Sold with or without AC plug.

Additional Photos:

The lowest price Guaranteed
or we'll beat it by 5%
Click for more info

Our Price: $16.99
Pre-season Price: $12.39
You Save: $4.60

Availability/Ships: 24 To 48 Hours
Product Code: 55

With Attached AC Plug

Pre-Attached AC Plug [Add $1.00]

To Provide Input Power to Power Supply

1 of 3 Prong Male Input Power Cord 5ft (Unattached) [Add $2.49]

Qty:

Product Features

[Customer Videos Page]

Attaching Power Supply to the HolidayCoro DMX Controller

How to build a Power-Over-CAT5
Power Injector

Product Features

General Product Information
- Used for reducing 100 to 130 volts to 12.5 volts DC
- Output of 3.75 Amps of power at 12 volts DC
- Output of about 45 watts
- Short circuit protection
- Waterproof to IP67
Items included with this item:
- Power Supply with bare leads for input and output
Recommended items for this product
- Shrink wrap tubing for protecting wiring connections (output and input).
- Note we do NOT recommend using electrical tape or wire nuts for wiring connections - this is unsafe.
Optional Items
- Zip ties or hot glue for mounting
Customer supplied tools or items:
- Hot glue gun (optional mounting method)
- Soldering iron and solder (60/40 rosin core recommended)
- Dikes / Side Cutters
- Heat Gun / Torch
Required items for operation:
- Shrink wrap tubing (for sealing soldered connections). We do not recommend wire nuts or electrical tape be used for connections.
- Spade/Two prong power input plug for high voltage side
- Solder for attaching RGB lights or controllers
Optional items
- Mounting (screws, two sided tape, hot glue or other)
Instructions
- See product page for wiring and product setup videos.
- For DMX + Power over CAT5 wiring, see our video or documentation
- For information on how many LEDs you can run from this power supply, see our Knowledge Base
Estimated assembly time:
- First unit: 5-15 minutes
Technical Specifications
- Color: Silver / Aluminum
- Weight: .65 pounds or 11 Oz
- Dimensions
  - Height: 1.0"
  - Width (main case, excluding mounting tabs): 9.1" or 9 1/8"
  - Width (main case including tabs): 9.72" or 9 3/4"
  - Height: .8"
  - Depth: 1.15"
- Temperature Range
  - Operation: 10 to 120 degrees Fahrenheit
  - Storage: -20 to 140 degrees Fahrenheit
- Material Composition
  - Case: Aluminum and plastic (end caps)
  - Wires: PVC coated - copper
County of Origin
- Materials/parts: China / USA / Japan
- Assembly: China
- Design: China
Certifications & Approvals
- Underwriters Laboratories (UL) Certified/Recognized/Approved: No
- CE: No
- ROHS (Lead Free): Not Listed
Wiring / Interface:
Power Input (100-130 volts AC)
- Neutral (Large blade of plug): Brown
- Hot (Small blade of plug): Blue
- Ground (Round pin): Yellow / Green
- Stripped and tinned wires ~6" Long
Power Output (12.5 volts DC)
- Red or Brown (varies by model): Positive 12v
- Black or Blue (varies by model): Negative 12v
- Stripped and tinned wires ~7" Long
Warranty & Support
- 60 days from date of purchase OR until December 31st of the year in which the product was purchased. For complete information, see our warranty details.
- See our support policy for details on what levels of technical assistance you can expect from HolidayCoro.
Customization: Yes - Minimum order of 200

You might also be interested in...

3 Channel DMX RGB Controller

RGB 8mm LED Waterproof Node - 12v

3 Channel DMX RGB Controller with Power over CAT5

12v RGB Square Module

Pre-season Price: $8.74

Add

Pre-season Price: $0.52

Add

Pre-season Price: $9.99

Add

Pre-season Price: $1.09

Add

RGB Rectangle Module

Pre-season Price: $0.99

Add

Average Rating: