Home > DIY Products > RGB Lights / Bulbs / Strip > Smart / Pixel RGB Lights - Strip / Tape / Ribbon / Rolls >

Smart / Pixel RGB LED Strip 30 LEDs/m 10 Pixels/m / Pre-Attached 10ft EasyPlug3 Input Cable / Waterproof Tube (16ft-6in/5 meter Roll) - 12v / 2811 or 1903 / RGB Color Output Order
Smart / Pixel RGB LED Strip 30 LEDs/m 10 Pixels/m / Pre-Attached 10ft EasyPlug3 Input Cable / Waterproof Tube (16ft-6in/5 meter Roll) - 12v / 2811 or 1903 / RGB Color Output Order


 
Our Price: $24.99

Availability/Ships: Usually Ships in 24 Hours
Product Code: 706-WP
Qty:

[Product Description Page] [FAQ & Documentation Page]
 
.
Product Features
  • Features
    • Please note that these require a smart pixel controller - these will not work with dumb controllers!
    • Design for pixel strip MegaTrees removing the need for extension cables
      • See our pixel MegaTree kits that include this type of pixel strip
    • Smart / Pixel Strip
    • Pixel protocol WS2811 and UCS1903 (supported by every major pixel controller)
    • Viewing angle of 120 degrees
    • Pre-Attached Waterproof connection
      • Input side
      • Output side
        • Sealed
    • White PCB circuit board background
  • Lights
    • Total LEDs per Strip: 150 of 5mm x 5mm (5050) RGB LED Lights
    • Total Individually Controllable Sections per Strip: 50 Sections (10 per meter) - each 4" in length, contain 3 RGB LED lights per section
    • Total DMX channels required: 150 DMX Channels (50 sections, each with three channels - Red, Green, Blue)
    • Color Output Order - RGB
  • Dimensions
    • Overall length is 5 meters or about 16 feet, 6 inches
    • Width of strip without protective boot: .393" / 10mm
    • Width of strip with protective boot: .492" / 12.5mm
    • Height of strip without protective boot: .125"/ 3.18mm
    • Height of strip with protective boot: .160" / 4mm
  • Weather
    • Silicone "boot" covers entire length of strip providing typical weather resistance
    • Ends are silicone glued to ensure weather tightness
    • Not intended for use underwater
  • RGB LED Chip (5050) Testing Specs:
    • 1,000 hours at 212f
    • 1,000 hours at 32f
    • -40f to 212f over 15 minutes, 40 times without failure
    • 50,000 hours (estimated) at 76f
  • Wiring colors:
    • Red = Power Input Anode/+/Positive
    • Black = Power Input Cathode/-/Negative
    • Yellow = Data Signal
    • See photos on this page for pin out map
  • Power
    • 12v DC Input
    • White (all three colors) Entire Roll: 3 amps / 36 Watts
    • 2.4 Watts per Foot / 7.2 Watts per Meter
  • Packaging
    • Each strip ships on a plastic reel, packed in a plastic, anti-static envelope.
    • Wiring instructions are provided on the outside of the envelope.
  • Lumens Output
    • The following table is listed PER 5050 LED:
      Minimum Maximum Unit
      Red400600 mcd
      Green 16002000 mcd
      Blue 300400 mcd
  • Color Output Wavelengths
      Minimum Typical Maximum Unit
      Red 620 623 626 nm
      Green 515 518 521 nm
      Blue 465 467 469 nm

Average Rating: 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
Great Product October 22, 2018
Reviewer: Anthony from Lincoln, RI United States  
The mega tree is overall amazing and everything is great. The size of the tree is huge. I didn't realize how big it was and they leave it up to you to decide how to build it which is good and bad but it will make a great piece to this years display.



Was this review helpful to you?