Home > RGB Lights / Bulbs / Strip & Ribbon > Smart / Pixel RGB Lights - Strip / Tape / Ribbon / Rolls >

Smart / Pixel RGB LED Strip 30 LEDs/m 10 Pixels/m / Pre-Attached 6in EasyPlug3 Input and Output Cables / Waterproof Tube (16ft-6in/5 meter Roll) - 12v / 2811 / RGB Color Output Order
Smart / Pixel RGB LED Strip 30 LEDs/m 10 Pixels/m / Pre-Attached 6in EasyPlug3 Input and Output Cables / Waterproof Tube (16ft-6in/5 meter Roll) - 12v / 2811 / RGB Color Output Order


 
Our Price: $21.99


Availability / Ships: Usually Ships in 24 Hours
Product Code: 707-WP

EasyPlug3 Female Pigtail for RGB Pixels

None - I am using HolidayCoro Extensions and/or Controllers
1 of Female EasyPlug3 Input / Start Pigtail Cable [Add $1.79]
    - Not required when used with HolidayCoro extensions and controller systems
EasyPlug3 Male Pigtail for RGB Pixels

None - I am using HolidayCoro Extensions and/or Controllers
1 of Male EasyPlug3 Output / End Pigtail Cable [Add $1.79]
    - Not required when used with HolidayCoro extensions and controller systems

Qty:  
[Product Description Page] [FAQ & Documentation Page]
 
.
Hands on with the product
Product Features
  • Features
    • Please note that these require a smart pixel controller - these will not work with dumb controllers!
    • Smart / Pixel Strip
    • Pixel protocol WS2811 (supported by every major pixel controller including Pixie) - 800Khz Speed
    • Color order RGB
    • Viewing angle of 120 degrees
    • Pre-Attached 6" Waterproof connections
    • White PCB circuit board background
  • Lights
    • Total LEDs per Strip: 150 of 5mm x 5mm (5050) RGB LED Lights
    • Total Individually Controllable Sections per Strip: 50 Sections (10 per meter) - each 4" in length, contain 3 RGB LED lights per section
    • Total DMX channels required: 150 DMX Channels (50 sections, each with three channels - Red, Green, Blue)
    • Color Output Order - RGB
  • Dimensions
    • Overall length is 5 meters or about 16 feet, 6 inches
    • Width of strip without protective boot: .393" / 10mm
    • Width of strip with protective boot: .492" / 12.5mm
    • Height of strip without protective boot: .125"/ 3.18mm
    • Height of strip with protective boot: .160" / 4mm
  • Weather
    • Silicone "boot" covers entire length of strip providing typical weather resistance
    • Ends are silicone glued to ensure weather tightness
    • Not intended for use underwater
  • Wiring colors:
    • Red = Power Input Anode/+/Positive
    • Black = Power Input Cathode/-/Negative
    • Yellow = Data Signal
    • See photos on this page for pin out map
  • Power
    • 12v DC Input
    • White (all three colors) Entire Roll: 3 amps / 36 Watts
    • 2.4 Watts per Foot / 7.2 Watts per Meter
  • Packaging
    • Each strip ships on a plastic reel, packed in a plastic, anti-static envelope.
    • Wiring instructions are provided on the outside of the envelope.

You might also be interested in...
EasyPlug3 / 3 Conductor / 10ft / Screw Together Extension / Waterproof Male + Female (18 AWG) / RGB Smart Pixels EasyPlug3 / 3 Conductor / 5ft / Screw Together Extension / Waterproof Male + Female (18 AWG) / RGB Smart Pixels EasyPlug3 / 3 Conductor / 20ft / Screw Together Extension / Waterproof Male + Female (18 AWG) / RGB Smart Pixels EasyPlug3 / 3 Conductor M | M (center) | F / Tap / Splitter / Tee / Power Injection (with modification) / RGB Smart Pixels
Our Price: $4.99

Add
Our Price: $3.09

Add
Our Price: $8.99

Add
Our Price: $3.79

Add
EasyPlug3 / 3 Conductor / 10ft / Screw Together Extension / Waterproof Male + Female (18 AWG) / RGB Smart Pixels EasyPlug3 / 3 Conductor / 5ft / Screw Together Extension / Waterproof Male + Female (18 AWG) / RGB Smart Pixels EasyPlug3 / 3 Conductor / 20ft / Screw Together Extension / Waterproof Male + Female (18 AWG) / RGB Smart Pixels EasyPlug3 / 3 Conductor M | M (center) | F / Tap / Splitter / Tee / Power Injection (with modification) / RGB Smart Pixels

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 34 Write a review »

  0 of 0 people found the following review helpful:
 
5 of 5 Great Job April 13, 2020
Reviewer: Randy L Longino from Barnard, KS United States  
As described, worked as expected.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 More pixel strips March 3, 2020
Reviewer: Gary Morrison from Pekin, IL United States  
I bought more pixel strips to add to my house project.  They will work perfectly for my designs

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 December 25, 2019
Reviewer: Terry Cooper from West Chester, OH United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Works perfectly! December 15, 2019
Reviewer: Mark Leavitt from Lake Oswego, OR United States  
Used an ESP32, the FastLED library, and wrote the rest of the code myself. These LED strings worked perfectly. Especially liked that the pin out diagram was right on the package since I did my own interfacing!  I recommend these for DIY projects!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 April 18, 2019
Reviewer: Dave Wallace from Sterling Heights, MI United States  


Was this review helpful to you?

View All Customer Reviews