Home > Ready2Run Controllers (Pixel, Dumb, AC) > Ready2Run AC 120v Controllers >

16 Output / 120 Volt Controller for Standard 120v LED and Incandescent Lights / Assembled / Ready2Run / (USA, Canada, Mexico Only) / AlphaPix Evolution CPU
16 Output / 120 Volt Controller for Standard 120v LED and Incandescent Lights / Assembled / Ready2Run / (USA, Canada, Mexico Only) / AlphaPix Evolution CPU
Photos show only controller


 
Additional Photos:


Our Price: $249.95


Availability / Ships: Usually Ships in 24 Hours
Product Code: 942-2


The following items are included with this product:

CAT5 Ethernet and Long Range Data Signal Cable

No Data Cable - I'll Provide My Own
5 Foot / 1.5 Meter Green CAT5 Data Cable for Data Signal [Add $1.99]
7 Foot / 2.1 Meter Green CAT5 Data Cable for Data Signal [Add $2.99]
25 Foot / 7.6 Meter Green CAT5 Data Cable for Data Signal [Add $3.99]  - Save $.50
50 Foot / 15 Meter Green CAT5 Data Cable for Data Signal [Add $5.79]  - Save $.70
100 Foot / 30 Meter Green CAT5 Data Cable for Data Signal [Add $8.99]  - Save $2.00
200 Foot / 60 Meter Green CAT5 Data Cable for Data Signal [Add $17.99]  - Save $2.00
Click Here For Complete CAT5 List and Accessories

Qty:  
[Product Description Page]
 
.
Hands on Demo
Product Features
This 16 output AC based controller is perfect for controlling legacy lights such as C7's, C9's, mini-lights and other 120v AC based lights. This fully assembled controller features:

  • For complete comparison of our AC controller family and Light-o-Rama, see: https://www.holidaycoro.com/kb_results.asp?ID=183
  • Fully assembled, tested and Ready2Run
  • Weatherproof enclosure
  • This unit ships with an AlphaPix CPU
  • Works with 120 power (not compatible with 240v power)
  • Control signals:
    • Artnet
    • e1.31 / sACN
  • 16 dedicated AC outputs
    • 2 Banks, specifications PER bank:
      • Input
        • 1 dedicated US type B grounded power input cable with 15 amp fuse per bank
        • Up to 15 amps of power per bank
        • Output
          • 8 outputs per bank
          • 6 amps per output (triacs are rated for 8 amps)
          • Dedicated US / Canadian type output pigtail cable per output
          • NOTE: Output plugs do not have grounds. If you need a controller with grounded outputs, see our 24 output EasyLights controller
    • Fully compatible with LOR S3/S4/S5, xLights, LightShow Pro, Vixen, Nutcracker, HLS, Madrix and hundreds of other E1.31 sequencing and control applications.
    • While this controller uses the same CPU as the DC based pixel controllers, it is not possible to add SPI or Long Range expansion boards to this product in combination with the AC output

    Share your knowledge of this product. Be the first to write a review »