Home > DIY Products (Parts+Pieces) > RGB Lights / Bulbs / Strip & Ribbon > Smart / Pixel RGB Lights - Nodes / Bullets >

Smart / Pixel LED RGB 8mm/12mm Square / Lay-Flat Node - 12v / 2811 / 100 Node String / Black / Waterproof EasyPlug3 Input and Output Cables
Smart / Pixel LED RGB 8mm/12mm Square / Lay-Flat Node - 12v / 2811 / 100 Node String / Black / Waterproof EasyPlug3 Input and Output Cables


 
Our Price: $44.98


Availability / Ships: Usually Ships in 24 Hours
Product Code: 671-WP

To Cap Unused Female Plugs


EasyPlug3 Female Pigtail for RGB Pixels

None - I am using HolidayCoro Extensions and/or Controllers
1 of Female EasyPlug3 Input / Start Pigtail Cable [Add $0.79]
    - Not required when used with HolidayCoro extensions and controller systems
EasyPlug3 Male Pigtail for RGB Pixels

1 of Male EasyPlug3 Output / End Pigtail Cable [Add $0.79]
    - Not required when used with HolidayCoro extensions and controller systems

Qty:  
[Product Description Page] [FAQ & Documentation Page]
 
.
Product Features

  • Features
    • Designed for single run, non-power injection projects like live tree "wrapping", snow flakes and more
    • Please note that these require a smart pixel controller - these will not work with dumb controllers!
    • Smart / Pixel Nodes
    • Square / Flat Style
    • Pixel protocol 1903/2811 (supported by every major pixel controller)
    • Viewing angle of 120 degrees
    • Waterproof input and output connections for easy, no solder connections
    • Black wire
  • Lights
    • Total LEDs per node: 3 (Red, Green, Blue)
    • Total LED nodes per string: 100
    • Total DMX channels required per string: 300 DMX Channels
  • Dimensions
    • Overall Length from node 1 to node 100: 28 feet (varies slightly)
    • Node to node (center) distance: ~3.4 inches
    • Lead in and lead out wire length with waterproof plugs:
      • Start: 6 Inches (male)
      • End: 6 Inches (female)
    • Maximum diameter of node: 12mm / .47"
    • Length of node body: 30mm / 1.21"
    • Overall length of node and LED: 1.46"
  • Weather
    • Silicone body/base
    • Epoxy sealed body/casing to ensure waterproof wiring and electronics
    • IP68
  • Power
    • Pixel direction is marked with arrows on circuit board (input side)
    • 12v DC Input
    • White (all three colors) per node: 45 miliamps / .55 Watts
    • White (all three colors) per string (100 nodes): 4.4 amps / 55 Watts @ 12v DC (this amount can vary by temperature, wiring to the string and supply voltage)

You might also be interested in...
Smart / Pixel LED RGB 8mm / 12mm Square/Lay-Flat Node - 12v / 2811 / 50 Node String / Black / Waterproof EasyPlug3 Input and Output Cables EasyPlug3 / 3 Conductor / 5ft / Screw Together Extension / Waterproof Male + Female (18 AWG) / RGB Smart Pixels EasyPlug3 / 3 Conductor / 5ft Total (2.5 + 2.5) / Screw Together / Pre-Stripped Pigtail / Waterproof Male + Female (18 AWG) / RGB Smart Pixels
Our Price: $23.49

Add
Our Price: $3.09

Add
Our Price: $2.99

Add
Smart / Pixel LED RGB 8mm / 12mm Square/Lay-Flat Node - 12v / 2811 / 50 Node String / Black / Waterproof EasyPlug3 Input and Output Cables EasyPlug3 / 3 Conductor / 5ft / Screw Together Extension / Waterproof Male + Female (18 AWG) / RGB Smart Pixels EasyPlug3 / 3 Conductor / 5ft Total (2.5 + 2.5) / Screw Together / Pre-Stripped Pigtail / Waterproof Male + Female (18 AWG) / RGB Smart Pixels

Share your knowledge of this product. Be the first to write a review »