 |
 |
 |
 |
|
 |
|
Product Features
- Features
- Please note that these require a smart pixel controller - these will not work with dumb controllers!
- Smart / Pixel Strip
- Pixel protocol WS2811 (supported by every major pixel controller)
- Viewing angle of 120 degrees
- Color Order: BRG
- Pre-Attached 6" Waterproof connections
- 3 Pin cable
- Input side
- Male pins
- 6 Inches (15 cm)
- Output side
- Female pins
- 6 Inches (15 cm)
- Compatible with all HolidayCoro 5, 10 and 20 ft 3 core extension cables (see here for listing of cables)
- White PCB circuit board background
- Lights
- Total LEDs per Strip: 150 of 5mm x 5mm (5050) RGB LED Lights
- Total Individually Controllable Sections per Strip: 50 Sections (10 per meter) - each 4" in length, contain 3 RGB LED lights per section
- Total DMX channels required: 150 DMX Channels (50 sections, each with three channels - Red, Green, Blue)
- Dimensions
- Overall length is 5 meters or about 16 feet, 6 inches
- Width of strip without protective boot: .393" / 10mm
- Width of strip with protective boot: .492" / 12.5mm
- Height of strip without protective boot: .125"/ 3.18mm
- Height of strip with protective boot: .160" / 4mm
- Weather
- Silicone "boot" covers entire length of strip providing typical weather resistance
- Ends are silicone glued to ensure weather tightness
- Not intended for use underwater
- Wiring colors:
- Red = Power Input Anode/+/Positive
- Black = Power Input Cathode/-/Negative
- Yellow = Data Signal
- See photos on this page for pin out map
- Power
- 12v DC Input
- White (all three colors) Entire Roll: 3 amps / ~36 Watts
- Packaging
- Each strip ships on a plastic reel, packed in a plastic, anti-static envelope.
- Wiring instructions are provided on the outside of the envelope.
|
|
|
|
|
|
|
